#Monitor coolant temp pc software#
#Monitor coolant temp pc Pc#

And it stresses it in ways that aren't indicative of real-world usage. Just have to 'try' curves, would recommend being harsh on the fans and working your way down, rather than starting low and trying to recover, less possible damage that way.

#Monitor coolant temp pc software#

The nice thing about RealTemp is you can set it to 100ms for monitoring the temps so it'll catch spikes, plus you can have the pump software open (iCUE, Link) to monitor the pump temp. Hotter = shorter lifespan for CPU, cooler = longer lifespan for CPU (well, for anything really, even the pump). So for that 8700K, I'd avoid getting it past 80C, just because it *can* hit 100C, doesn't mean you should. I have RealTemp running with a 'Sleep at 58C' safety so if my cores get to the point where they're going to hit that Tcase value of 64C, I want the machine to stop before they get there, don't need another SWR for a replacement CPU.

Suggestion would be to run a torture test (I know, everyone says 'NO!' about such 'Silly to do a fake test'), but Prime 95 on small FFTs will cause some pretty nasty heat, if you can get the temps to stay 'sane' (less than 80C is best, the cooler it is, the longer it'll last) and not be super noisy, then you'll soon have a quiet and cool PC, but remember that any good test takes an hour at a minimum, especially with liquid cooling because the temperature of the liquid takes longer to heat up than the CPU does and longer to cool down as well. The H80i V2 is up front with dual fans shooting air along the bottom of the chassis which is blocked by the GPU (~80% wall), so most of the air flows along the bottom of the chassis and out, but sadly, the hoses are right in it's path, so it too is also affecting performance that way (shame I couldn't mount that upside down, but it wasn't possible as the GPU and the hoses hit 100% and there was no logical method of putting the hosing in without some serious bends and the tension on the mount would have been violent). I'm noticing that same issue with my 6700K and the H80i V2, the rad hoses go right past the GPU at the bottom of the case and over top of the GPU (1050Ti-OC), the heat down at the bottom of the case is all the GPU and pump fan output as the temp creating chips are above the GPU and aren't being affected by any internal fans aside from the one up top pulling only chassis air out. Definitely seems like it's the GPU waste heat affecting the coolant temp and not the CPU usage as I had thought. You take a penalty for having a high coolant temp, but it does not mean you are in danger. However, that extra 15C+ of coolant adds 15C to his CPU temperature as well. He can't make it colder and no his system won't fail. On the other hand, if your case is 39C like the guy in the thread, then it means nothing.

#Monitor coolant temp pc Pc#

However, if you were starting a typical room temperature (for PC labs) of 20-23C, then that would represent a +17C coolant gain. Some of this is addressed in the thread, but the supposed max coolant temp of 40C is not a fail point. Your CPU will go to 50-60-70C and it's fine. This person has some environmental issues to address, but it is the same CPU and cooler for some perspective.ĭon't worry about this. Have a quick look at A-D in post 2 in the following thread.

Considering the warning temp for the coolant is at 45C and based of my previous numbers, I can't imagine that would be good.ĭon't worry about this.

I haven't gotten around to anything intense yet like a FPS game and I know that some of those will probably make my CPU hit the 50s, 60s and maybe 70s.